CUSHCRAFT LFA-2M16EL, Инструкция по эксплуатации

Страница: 7 / 12

Put one hose clamp over each end of each tube. Insert the loop ends into the 7/16 tubes.
Don’t force them. Keep them straight as they go in. Leave them loose for tunning the
SWR later. The tubes will have enough friction to stay without the hose clamps being
tightened.
INSTAL THE ELEMENTS
The Rod elements are labeled with color bands using the
standard resistor color codes. Starting from the rear of
the antenna, the first rod is R1 and the last rod is R13.
R1 is the reflector and R2 is the first director. A chart is
provided and the element colors are listed for each element.
Install them on the boom in the proper location using the
half washer, saddle and 8-32 x 2 inch bolts nuts and lock
washers. Because of different size boom sections, some
bolts need to be longer to mount the element. These bolt
lengths are listed on the next page.
8-32 x 2
8-32 x 2-1/4
8-32 x 2-1/2
half washer
element saddle
R1
R2
R3 R4 R5 R6 R7 R8
R9 R10 R11
R1 R2 R3 R4
R12 R13 R14 R15
BLACK 0
BROWN 1
RED 2
ORANGE 3
YELLOW 4
GREEN 5
BLUE 6
VILOET 7
GREY 8
WHITE 9
3/16 ELEMENT ROD LENGTHS
AND COLORS
R1 41.5 INCH BROWN (Reflector)
R2 37.9 INCH RED (Director #1)
R3 36 INCH ORANGE
R4 36.5 INCH YELLOW
R5 36.5 INCH GREEN
R6 36 INCH BLUE
R7 35.75 INCH VIOLET
R8 35.5 INCH GREY
R9 35.15 INCH WHITE
R10 34.5 INCH BROWN BLACK
R11 34. INCH BROWN BROWN
R12 33.50 INCH BROWN RED
R13 33.50 INCH BROWN ORANGE
R14 33.50 INCH BROWN YELLOW
R15 33.50 INCH BROWN GREEN