CUSHCRAFT A627013S, Инструкция по сборке и установке

Страница: 4 / 10

A627013S
1. BOOM ASSEMBLY
Assemble the boom as shown below. Slide the appropriate end of BB
(figure A) into the slotted end of BA until the first holes align. Pin these
aligned holes temporarily with a machine screw (231) and slide worm
clamp (410) over BB onto the slotted end of tube BA and tighten. Push
the end caps (61 &13) onto the ends of the boom. Tighten clamp 410,
remove temporary screw (231) and return it to the parts bag.
BA A270- ALUM 1" x 32" 1
10SBA TUBE (2.5 x 81.3 cm)
BB A270- ALUM 7/8" x 48" 1
10SBB TUBE (2.2 x 121.92 cm)
BC A6270- ALUM 1-1/4" x 36" 1
13SBC TUBE (3 x 91.44 cm)
13 050013 PLASTIC 1-1/4" 1
CAP (3 cm)
61 050061 PLASTIC 7/8" 1
CAP (2.2 cm)
231 010231 SS MACHINE 8-32 x 1-3/4" 1
SCREW (4.4 cm)
410 030410 WORM 7/16Ó-1" 1
CLAMP (1.1-2.5 cm)
412 030412 WORM 11/16Ó-1-1/2" 1
CLAMP (1.7-3.8 cm)
KEY P/N DISPLAY DESC SIZE QTY
KEY P/N DISPLAY DESC SIZE QTY
FIGURE A
3
MASTER PARTS LIST (continued)
KEY PART # DESCRIPTION QUANTITY
103-1/2"
(262.8 cm)
412
410
BB
BA
BC
36"
(91.44 cm)
32"
(81.28 cm)
48"
(121.92 cm)
EJ A27010SEJ 34-13/16" (88.4 cm) element rod 1
CB A50CB Connector Bracket Assembly 1
6MEA A50EA 3/4Ó x 48" (1.9 x 121.9 cm) aluminum tubing slotted both ends /drilled 3
6MEB A503SEB 5/8Ó x 37-1/2" (1.6 x 95.2 cm) aluminum tubing 2
6MEC A503SEC 5/8Ó x 34-1/4" (1.6 x 86.9 cm) aluminum tubing 2
6MED A503SED 5/8Ó x 31-1/2Ó (1.6 x 80 cm) aluminum tubing 2
RM1 A27010SRM1 5-1/2" (14 cm) Reddi-Match assembly for 2 meters 1
RM2 A270RM2 3-3/8" (8.6 cm) Reddi-Match assembly for 70 cm 1
RM3 A503SRM3 17Ó (41.2 cm) Reddi-Match assembly for 6 meter 1
FL A27010SFL Feedline harness 1
61
13
Holes need to align when together