25
© 2016 Maka Technologies Group. All Rights Reserved.
10. Video Setting
Press
MENU button
to get into the mode setting interface
when camera power on. Then press Shoot button to enter. There
are
5
type of setting as shown below
10.1 Video Resolution
10.1.1 Press
Up/Down button
to select video resolution
once get into setting interface.
10.1.2 Press
Shooting button
to enter and press
Up/Down button
to select resolution and confirm with
Shooting Button press on once and exit.
10.2 Recording Sound
10.2.1 Press
Up/Down button
to select recording sound
once get into setting interface.
10.2.2 Press
Shooting button
to select
or
and
proceed with the next setting
10.3 Time-lapse
Time-lapse is a video technology to set the video shot
frequency much lower than the frequency needed in
playback.
***It
is
always recommended
to
set as close. The higher the number
set, the recording will be playback in high speed mode due to play
back is in 30fps mode. (Refer to Chart on page 37)