Curtis TV2740, Руководство по эксплуатации

Страница: 9 / 14

SELECTING INPUT SIGNAL
Watching AV program
AV1
S-Video
TV
AV2
This TV set provides AV input terminals for your convenient connection to VCR, or other video
equipments. To watch video program from AV inputs, press
TV/AV button repeatedly until you see the appropriate input
indicator on the screen.
Notes:
¾ AV1: Select AV1 when viewing the signals
from the video equipment connected to the AV1 IN
terminals.
¾ AV2: Select AV2 when viewing the signals
from the video equipment connected to the AV 2 IN
terminals.
¾ S-Video: Select “S-Video” when viewing the
signals from the video equipment connected to the S-VIDEO IN terminals.
Switching from AV to TV
When the TV set is in AV mode, you can press TV/AV button repeatedly to switch back to TV mode.
TUNING IN
TV/CATV selection
Before your TV can memorize the available channels,
you must specify the type of signal source that is
connected to the unit (i.e., an antenna or cable s
1. Press MENU repeatedl
ystem):
y to display Search
2. H- or CH+ to select Signal Input.
ntrol to
menu.
Press C
3. Press V- or V+ to select Air or CATV.
4. Press DISP button on the remote co
clear the menu screen.
Notes:
elect Air if
¾
S using VHF/UHF antenna, select CATV if using Cable TV.
e which allows channels to skip up or down to
h menu.
egin memorizing all the channels available in
4. mote control to clear the menu screen.
skip unwanted channels so that only the channels you want
Setting the channels into memory
This TV is equipped with a channel memory featur
the next channel set into memory, skipping over unwanted channels. Before selecting channels,
they must be programmed into the TV’s memory.
1. Press MENU repeatedly to display Searc
2. Press CH- or CH+ to select Auto Search.
3. Press V+ to start the search. (The TV will b
your area.)
Press DISP button on the re
To
After presetting the channels, you can
skip unwanted channel
to watch can be accessed with Channel up/down buttons.