To open the lid:
– Move the carrying handle to the back of the airpot.
– Squeeze in the two lock buttons on both sides of
the lid and lift backwards.
– Remove the stopper and fill to 1¼” from the
mouth of the liner. Return the stopper and close
the lid.
IMPORTANT: To avoid temperature drop when first brewing coffee into the
airpot, preheating the airpot is recommended. Fill the airpot with hot water
for a moment, just to warm the liner. Empty the hot
water, then brew.
Using an airpot brewer:
– When brewing for the first time, set the
brew time with the stopper removed so
you can observe the brew volume. Once
volume is set, you may brew through the
stopper.
– Because the orifice on the stopper is
small, take care when centering under
the brewer.
– Close the lid. Lid should snap closed.
To dispense coffee:
– Lift the lever arm high enough to en-
gage the safety prop that holds the
lever arm the pumping position.
– Pump the lever arm to dispense.
CAUTION
Do not immerse in water. Do not place in dishwasher. Do
not use harsh powders or cleansers containing chlorine.
Instructions
Contents will not flow when pumped. Things to check:
–
Is there adequate liquid volume in the airpot.
–
Is the stopper properly inserted?
–
Is there a tight fit at the stopper gasket?
–
Is the lever handle being pumped with enough force?
–
Is the suction pipe of the stopper assembly clogged.
–
Has the rotating bottom cover loosened. A leak in air
pressure may cause insufficient suction.
Troubleshooting
ecn 9329 . 10/23/07
10/07 F-3321 rev B
LID & LEVER ASSEMBLY BLACK
LID & LEVER ASSEMBLY ORANGE DECAF
STOPPER ASSY, TLX30
WC-5672
WC-5670
WC-5689
Part Nº
Description
Index Nº
1
1A
2
Cleaning
– Clean with warm water and dishwashing detergent.
– Use a sponge cleaning brush to scrub inside.
– Rinse thoroughly with hot water.
