OPERATING INSTRUCTIONS
OI14
SWEETENER REPLACEMENT/CONNECTION, OPERATING INSTRUCTIONS
082216NC
Sweetener Bag-in-Box BIB Replacement/Connection Instructions
The sweet tea mixing system is designed to provide continuous
operation, provided that two BIBs are always connected. When one
BIB becomes empty, the system automatically switches over to the
other one. Replace empty BIBs immediately to assure continuous
operation.
2 Slide the QCD sideways off
of the BIB spout.
3 Place the new BIB container
on the rack and remove the
cardboard spout cover.
4 Pull off the shipping cap that
covers the spout on the bag.
5 Place the QCD next to the
spout, then slide sideways
until it stops.
The brewer will prime the new bag and begin to use the contents when the other bag runs out of sweetener.
1 Release the quick connect/
disconnect connector (QCD)
by pulling up on the hose
and cap assembly on the
opposite side. The plunger
will pop up in the center of
the QCD.
6 Push in on the QCD plunger
until it snaps into place.
Pull plunger out
before removal
