FCC NOTICE
The FCC requires that you be advised of certain requirements involving the use of
this telephone.
1.
This telephone is hearing aid compatible.
2.
This equipment complies with Part 68 of the FCC Rules. A label on the
BASE UNIT
of this equipment contains, among other information, the ACTA
Product Number and the Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company.
3.
The REN is also useful in determining the quantity of devices that you
may connect to your telephone line and still allow these devices to ring
when your telephone number is called. In most areas, but not all, the sum
of the RENs for all devices connected to one line should not exceed five
(5.0). To be certain of the number of devices that you may connect to your
line, you should contact your local telephone company.
4.
If your telephone causes harm to the telephone network, the telephone
company may temporarily disconnect your service. If possible, they will
notify you in advance that temporary discontinuance of service may be
required. However, when advanced written notice is not possible, the
telephone company may temporarily discontinue service without notice if
such action is necessary under the circumstances.
5.
The telephone company may make changes in its communication
facilities, equipment, operations, or procedures that could affect the proper
operation of your equipment. If they do, you will be provided with advance
notice as to give you an opportunity to maintain uninterrupted service.
6.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs. (Contact your
state public Utility Commission or Corporation Commission for
information.
7.
An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using a compatible modular jack which is Part
68 compliant. See Installation Instructions for details.
8.
Please follow instructions for repairing, if repairing any (e.g. battery
replacement section), otherwise do not alter or repair any parts or device
except specified.
9.
The USOC number of the registration jack for this equipment is RJ11C.
32
FCC Requirements
