Preparing for Use
Before you can use your cordless telephone, you must charge the
HANDSET
for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
1. Place the
HANDSET
on the
BASE UNIT/CHARGER UNIT
for 12 hours.
2.
After 12 hours, remove the
HANDSET
from the
BASE UNIT/CHARGER UNIT.
Before you can use your cordless telephone, you must charge the
HANDSET for 12 hours. Failure to do so will require more frequent charging
of the BATTERY PACK.
NOTE:
Depending on the frequency of use, once the
HANDSET
is fully charged, it
remains functional for approximately 4 hours of continuous use and approximately 4
days when the
HANDSET
is off the
BASE UNIT
or
CHARGER UNIT
in STANDBY
mode.
If your have a more than one HANDSET, please see page 29 for
multi-HANDSET system for preparing.
Receiving Calls
1.
When the phone rings, the LCD Screen will show “RING….” If you have Caller ID, the
LCD Screen will show the Caller ID information after the first ring.
2.
With the
HANDSET
off the
BASE UNIT/CHARGER UNIT,
press the
Talk
button. Start your
conversation. The Call Timer starts to count.
3.
To end your conversation, either press the
Talk
button or place the
HANDSET
on the
BASE UNIT.
If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE, you
activate the AUTOMATIC STANDBY feature.
NOTE:
The Call Timer will start to count once you press the
Talk
button.
Minutes
Seconds
Call Timer Display
NOTE:
While the 5.8GHz frequency is inherently clearer, we suggest that you do not
use this phone within 20 feet of a working microwave. The microwave produces
frequencies in this range which may cause interference. This interference is normal
for all 5.8 GHz phones and should not be considered a product defect.
Cordless Telephone Operation
11
TALK
01 45
min sec
TALK
01 45
min sec
Содержание TC590
Страница 6: ...HANDSET Controls 5...
