TO STOP A CD PART WAY THROUGH
Press the Stop button. Disc play will stop, and the display will show the total number of tracks.
To temporarily stop disc play (pause mode), press the PLAY/PAUSE button. Disc play will stop
at the current play position. The track playing time will flash .
To resume disc play, press the PLAY/PAUSE button again.
TRACK SKIP
STARTING DISC PLAY FROM THE BEGINNING OF A PARTICULAR TRACK
Press the SKIP Forward or REW TRACK buttons to select the desired track. The number of
the selected track will be shown on the CD display. Press the PLAY/PAUSE button to start play.
TO SKIP TO THE NEXT TRACK
For example, to skip ahead to the beginning of track 5 while track 4 is playing. . Press the SKIP
FWD TRACK button once. Disc play will resume at the beginning of track 5. The CD player will
skip ahead to the next track each time the SKIP FWD TRACK button is pressed.
Repeatedly pressing the SKIP FWD TRACK button makes the CD player skip ahead through
the disc track by track. Once the beginning of the last track is reached the CD player advance
to the first track.
TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC
For example to skip back to the beginning of track 3 while track 4 is playing. Press the SKIP R-
EW TRACK button twice. Disc play will resume at the beginning of track 3. The CD player will
skip back one track each time the Reverse Skip Track button is pressed. If this button is press-
ed in the middle of a track, the CD player will skip back to the beginning of that track. To make
it skip back to the previous track press the SKIP REW TRACK button twice.
Repeatedly pressing the SKIP REW TRACK button makes the CD player skip back through the
disc track by track. Once the beginning of the first track is reached, the CD player will go to the
last track.
If the disc is inserted incorrectly, or the disc is damaged the display will show "No disc".
DISC ERRORS
This compact disc player has built-in error compensation circuits to correct for minor defects in
a disc. There are limits, however, to the amount of correction available.
In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc pl-
ay. This problem may be caused by defects (such as scratches) in the disc being played, which
are too large for the error compensation circuits to handle. If you encounter this problem, check
the CD player's operation as follows, before having the unit serviced: Play a new disc. If the CD
player operates normally, the skipping problem is probably due to a defective disc.
Notes:
The SKIP Forward TRACK buttons can be used to select a desired track to play before disc pl-
ay starts. In this case the number of the selected track will be display until the PLAY/PAUSE
button is pressed.
