ACCESSORIES
Please check and identify the supplied accessories.
............................................................................................................ .........
................................................................................................................
................................................................................................................
...........................................................................................................
.
GETTING STARTED
USING
THE
REMOTE
CONTROL
TO INSTALL THE BATTERIES
BATTERY REPLACEMENT
CAUTION
1
.
Open
the
batter y
door
.
2
.
Insert
2
"
AA
"
batteries
.
: Danger of explosion if battery is incorrectly replaced.
NOTES
,
.
WARNING :
3
x 2
x 1
x 1
x 1
x 1
Remote control ..................................................................................................................
Remote control
Battery(AA)
Warranty Card
Instruction Manual
Switching
Adaptor
·
Point the remote control at the remote sensor located on the unit.
·
When there is a strong ambient light source, the performance of the infrared remote sensor
·
may be degraded, causing unreliable operation.
·
The recommended effective distance for remote operation is about 16 feet (5 meters).
When the batteries become weak, the operating distance of the remote control is greatly
reducedand you will need to replace the batteries.
·
If the remote control is not going to be usedfor a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
·
Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
·
Always remove batteries as soon as they become weak.
·
Weak batteries can leak and severely damage the remote control.
Donotdispose batteriesin a fireBatteries mayexplode or leak
Batteries shall not beexposed toexcessive heatsuch as sunshinefire orthe like
