Curtis LCDVD198, Руководство пользователя

Страница: 38 / 44

ONL
Y
REFERENCES
SPV7050P-America OSD
NOTE: There is a problem in VGA mode.(Only VGA mode applied)
PROBLEM POSSIBLE SOLUTION
The signal is out of range.
- Adjust resolution, horizontal frequency, or vertical frequency.
- Check it whether the signal cable is connected or loose.
- Check the input source.
Vertical bar or stripe on
back ground&Horizontal
Noise&Incorrect position.
- Work the auto configure or adjust clock, phase, or H/V position.
Screen color is unstable
or single color.
- Check the signal cable.
- Reinstall the PC video card.
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new
TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the screen Cleaning the screen
1. Here’ s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
Teletext operation
If you expect to leave your TV dormant for a long time(such as a vacation), it’s a good idea to unplug the
power cord to protect against possible damage from lightning or power surges.
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the
power cord to protect against possible damage from lightning or power surges.
Handing Discs
1. To remove a disc from its storage case, press on the centre of the case and take the disc out.
2. Hold the disc by the edges, to avoid touching the Recorded side of the disc.
MAINTENANCE
-34-