Curtis KCR2606 страница 1 Скачать руководство пользователя

Страница: 1 / 12

KCR2606 (A5) (English) 2 Oct 2007 /L

BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND,
AND FOLLOW THESE INSTRUCTIONS.
Be sure to save these booklet for future reference.

KCR2606 (A5) (English) 2 Oct 2007 /L

SAFETY INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

LOCATIONS OF CONTROLS

KCR2606 (A5) (English) 2 Oct 2007 /L

PLAYING A COMPACT DISC (CD)
NOTE:

Never touch the laser lens inside of the CD compar

tment. Clean the laser lens with

a CD cleaner disc if it becomes dir

1. Press the Power ON/OFF Button to tur

n on the unit.

2. Press the Function Button to CD function.
3. Press the OPEN/CLOSE BUTT

ON to open the CD door and inser

t a CD into the tra

with printed label side facing up.

4. Press the OPEN/CLOSE BUTT

ON to close the CD DOOR and

, the disc will rotate for a

few seconds and then stop.

5. Press the PLAY/PAUSE/M- B

UTT

ON to star

t pla

6. Press the PLAY/PAUSE/M- B

UTT

ON ag

ain to P

USE pla

7. To stop the album temporaril

, press P

USE b

utton, to resume, press ag

ain.

8. Press the STOP BUTTON to ST

OP pla

RANDOM PLAY

In CD stop mode, Press the RANDOM B

UTT

ON once, “RAND” will appear on LCD

Display. Press PLAY/PAUSE/M- B

UTT

, this will enab

le random tracks pla

REVERSE/FORWARD

1. The SKIP–/TUN– and SKIP+/TUN+ Buttons can be used to jump to a dif

ferent track

number or to scan disc tracks at high speed.

2. Press the SKIP-/TUN– BUTT

ON once to hear the be

ginning of the cur

rent track.

Press it two or more times to hear pre

vious tracks on the disc.

3. Press the SKIP+/TUN+ BUTT

ON to hear the ne

xt track on the disc.

4. Press and hold the SKIP–/TUN– Button, the cur

rent track will be scanned and mo

backwards to the previous track(s);

When the desired track section is found

, release the

button and normal play will resume.

5. Press and hold the SKIP+/TUN+ B

UTT

, the cur

rent track will be scanned and mo

forward to the next track(s);

When the desired track section is found

, release the selected

button and normal play will resume.

REPEAT FUNCTION

The CD REPEAT Button may be used to repeat a single track or repeat all tracks on a
compact disc.
1. Press the REPEAT BUTTON once during pla

yback, the “REP” sign will sho

w on LCD

Display and flash. The same track will be repeated o

er and o

2. Press the REPEAT BUTTON a second time to repeat all tracks.

The “REP” sign will

show on the LCD display, but will not flash this time.

3. To cancel REPEAT PLAY, Press the REPEA

T B

UTT

ON repeatedl

y until the “REP” sign

disappeared.

PLL Tuning AM/FM Stereo Radio CD Player

MODEL KCR2606

Instruction Manual

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THE APPLIANCE TO RAIN OR MOISTURE.

8. heat-The appliance should be situated away from neat sources such as radiators, heat

registers, stoves, or other appliances (including amplif iers) that produce heat..

9. Power Sources-The product should be operated only with the type of power supply

indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operation instructions.

10. Grounding Polarization-This product may be equipped with a polarized alternating

current line plug (a plug having one blade wider than the other). This plug will fit into
the power outlet only one way this is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to f it,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.

11. Power-Cord Protection-Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.

12. Cleaning-The appliance should be cleaned only as recommended by the manufacturer.
13. Nonuse periods-The power cord of the appliance should be unplugged from the outlet

when left when left unused for a long period of time.

14. Object and Liquid Entry-Care should be taken so that objects do not fall and liquids are

not spilled into the product case through product openings.

15. Damage Requiring Service-Unplug this product from the wall outlet and take it to

qualif ied service personnel under the following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled into, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate when used according to the operating instructions.

Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may interfere with the product's normal
operation.

e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance-this indicates a need for

service.

16. Servicing-The user should not attempt to service the product beyond that described in

the operating instruction. All servicing should be referred to qualif ied service
personnel.

17. Power Lines-An outside antenna system should not be located in the vicinity of

overhead power lines, or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching power lines or circuits as contact with them
might be fatal.

18. If an outside antenna is connected to the receiver, be sure the antenna system is

grounded so as to provide some protection against voltage surges and built up static.
Section 810 of the National Electrical Code ANSI/NEFA 70 provides information with
respect to proper grounding of the mast and supporting structure, grounding
conductress, location of antenna-discharge unit, size of grounding electrodes, and
requirements for the grounding electrode (see f igure).

1. Read instructions-All the safety and operating instructions should be read before the

appliance is operated.

2. Retain instructions-The safety and operating instructions should be retained for future

reference.

3. Head Warnings-All warnings and cautions on the appliance and in the operating

instructions should be adhered to.

4. Follow instructions-All operating and use instructions should be followed.
5. Water and Moisture-The appliance should not be used near water, e.g. near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool or
the like.

6. Wall or Ceiling Mounting-The appliance should not be mounted to a wall or ceiling.
7. Ventilation-The appliance should be situated so that its location or position does not

interfere with its proper ventilation. For example, the appliance should not be situated
on a bed, sofa, rug or similar surface that may block the ventilation openings, or placed
in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air
through the ventilation openings.

19. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

20. Lightning-For added protection for this product during a lightning storm, or when it is

left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the product due to
lightning and power-line surges.

21. Safety Check-Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks to determine that the product is in proper operation
condition.

22. Overloading-Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of f ir or electric shock.

NEC NATIONAL ELECTRICAL CODE
Do not apply oil or petroleum products to this product.

CAUTION

Invisible laser radiation will be emitted when the product is open and interlocks are defeated.
Do not defeat the safety interlocks.

GRAPHIC SYMBOLS WITH SUPPLEMENTARY MARKINGS ARE LOCATED ON THE
BOTTOM OF THE UNIT.

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE PROCEDURE HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

SAFETY CERTIFICATION

This Compact Disc Player is made and tested to meet the safety standards of the Federal
Communications Commission(FCC) and to comply with the safety performance requirements
of the U.S. Department of Health and Human Services and with the Food & Drug
Administration(FDA) Radiation performance Standards 21 CFR Subchapter J.

POWER Button

REMOTE SENSOR

STANDBY INDICATOR

CD Door

STEREO /MONO Button

ALARM SET Button

SLEEP Button

TIMER Button

FUNCTION Button

10. OPEN/CLOSE Button
11. VOLUME MIN Button
12. VOLUME MAX Button
13. PLAY/PAUSE/MEMORY– Button
14. STOP/ Button
15. SKIP+/ Button
16. SKIP–/TUNNNING– Button
17. REPEAT/BAND Button
18. PROGRAM/MEMORY Button
19. RANDOM/TIME SET Button
20. DISPLAY BUTTON
21. LCD Display
22. HANGING HOLE
23. CORD LINE

Locations of Remote Control

24. TIMER Button
25. SNOOZE Button
26. MUTE Button
27. DISPLAY/AL Button
28. REPEAT/BAND Button
29. MEMORY– Button
30. SKIP– Button
31. STOP Button
32. VOLUME DOWN button
33. POWER Button
34. OPEN/CLOSE/STEREO/MONO Button
35. SLEEP Button
36. CD/RADIO Button
37. MODE Button
38. PROGRAM Button
39. Button
40. SKIP+ Button
41. PLAY/PAUSE Button
42. VOLUME UP Button
43. BATTERY COMPARTMENT

BATTERY BACKUP:

Two 1.5V “AAA” batteries (not included) may be installed as a backup option to maintain
the time if electrical power fails. In the event of a power outage, the time will not appear
on the clock LCD Display, however the clock will continue to operate and the actual time
will be maintained. The Clock LCD Display and other functions will resume once electrical
power is restored if used the backup battery .The backup battery should be replaced as
needed; Remove the battery if the clock is not used or stored for long periods of time.

TO SET THE CLOCK TIME

Connect the AC power cord to a wall outlet. Make sure that it is in “Power off ” mode.
1. Power off the unit and enter into “POWER OFF” mode. Press the RAND/ TIME SET

BUTTON, the time will blink.

2. Press the SKIP+/TUN+ to set the DESIRED HOUR.
3. Press the SKIP–/TUN– to set DESIRED MINUTE.
4. When the desired time have set, Press the RAND/TIME. SET BUTTON twice.

TO SET ALARM FUNCTION

1. Power off the unit and enter into “POWER OFF” mode. Press the RAND/ TIME. SET

BUTTON twice, the time will blink and there will be an alarm signal 'AL” display on
the LCD.

2. Press the SKIP+/TUN+ to set the DESIRED HOUR.
3. Press the SKIP–/ TUN– to set DESIRED MINUTE.
4. After setting the alarm time as your desired, to press RAND/ TIME. SET BUTTON.
5. Press AL. SET BUTTON to turn on the alarm function.

WAKE UP TO ALARM BUZZER:

a. Press the AL. SET BUTTON.
b. Alarm sign “

” will show on LCD display

c. The buzzer will sound at the set alarm time.

Note:

“

” and “ ” sign will alternatively show on LCD Display when you press the

alarm function.

WAKE UP TO CD:

a. Press the POWER BUTTON to switch power on.
b. Press the FUNCTION BUTTON to the CD function.
c. Open the CD Door and insert a CD (with the label side facing up) into the CD

compartment.

d. Close the CD Door.
e. Press the POWER BUTTON to switch power off.
f. Press the AL. SET BUTTON until “ ” sign show on the LCD Display.
g. The CD will sound at the set alarm time.

To deactivate the alarm (CD playing) manually, press the STOP Button.

WAKE UP TO RADIO:

a. Press the POWER BUTTON to switch power on.
b. Press the FUNCTION BUTTON to the RADIO function.
c. Tune the radio to a broadcasting station and adjust the volume as desired.
d. Press POWER BUTTON to switch power off.
e. Press the AL. SET BUTTON until “ ” sign show on the LCD Display.
f. The radio will sound at the set alarm time.

Note:

To deactivate the alarm (Radio sound) manually, press the POWER BUTTON.

HOW TO TURN OFF THE ALARM

To cancel alarm mode:
In “POWER OFF” mode, press AL. SET button to turn off the alarm function.
(Alarm sign “

” or “ ” will disappear on the LCD Display).

ADJUST VOLUME

Press VOL.MAX button to increase the volume.
Press VOL. MIN button to decrease the volume.

RADIO OPERATION

1. Press the POWER ON/OFF BUTTON to switch Power on.
2. Press the FUNCTION BUTTON to the RADIO Function.

(NOTE: Radio and CD Function are alternative select each time when the Function
Button is pressed.)

3. Press the REP/BAND BUTTON to desired band (AM/FM). AM and FM are alternately

selected each time when the REP/BAND button is pressed.

4. How to use the buttons for radio

a) Manual Tuning

Press the SKIP+/TUN+ BUTTON or SKIP-/TUN- BUTTON to search for desired
frequency. Higher frequency can be selected by pressing the “SKIP+/TUN+” button
while Lower frequency can be selected by pressing the “SKIP–/TUN–” button

b) Automatic Tuning

i) Press and hold the SKIP+/TUN+ BUTTON or SKIP–/TUN– BUTTON until the

display frequency starts run.

ii) When a station of sufficient strength has been found Tuning will stop or you can

stop the automatic tuning by pressing SKIP+/TUN+ or SKIP–/TUN– BUTTON.

5. Press the ST/MONO BUTTON to select Stereo and Mono as desired in case FM band is

being selected. (If stereo signal is too weak, press ST/MONO BUTTON to mono mode,
the reception will be improved.)

6. To switch off the radio, Press the Power ON/OFF Button.

PRE-SET TUNING

1. Select the AM/FM band and tune to your desired station according to the normal tuning

procedure.

2. Press the PROG/MEM BUTTON,”MEM” will appear and flash in the LCD, Then use

STOP/M+ or PLAY/PAUSE/M– BUTTON to change the number where the station will
be stored. (NO.1 to NO.19)

3. Store the current frequency by pressing PROG/MEM BUTTON again when you get the

desired number. (The "MEM" still appears and will be steadily ).

4. Repeat the same procedure to set other desired frequencies into Memory No.1 to NO.19

Remarks: A stored frequency can only be erased by storing another frequency in its place.

MEMORY RECALL

Recall the stored frequencies by pressing STOP/M+ or PLAY/PAUSE/M- BUTTON to
select 1 to 19 station as desired

NOTE:

As stored frequencies can only be stored for long time with the power supplying.

The station you stored will be lost and can not be recalled in case that you cut off the AC
power.

HANDLING A COMPACT DISC

• Always protect a disc against scratches, soil, dust and etc. If a disc is treated with

reasonable care, wiping off the disc with a soft cloth should be the only maintenance
needed to retain its excellent sound reproduction. Discs should be retained in their
original case during periods of non-use.

• Handle a disc only by its edges, do not touch the surface or rainbow-colored side of the

disc.

• Handle a disc as shown in the illustrations in this section.
• Use a soft cloth to wipe a disc clean. Do not use benzene, thinner, or other chemical

cleaners to clean the disc as damage may result. A disc should always be wiped in a
straight line from its center to its edge. Never wipe a disc in a circular motion.

• Do not expose a disc to direct sunlight, high humidity, or high temperatures for extended

periods of time. Do not place the Disc on other equipment or near any heat source.

• Dust on the pickup lens can lead to erratic operation and interruption of the sound during

play. To clean the pickup lens, open the disc compartment and blow the dust off. Using a
camera lens blower (available at most camera stores)

• Note: Do not touch the surface of the lens. Do not allow any liquids on the inside of the

product.

• To clean the CD player cabinet, use a soft and damp cloth to wire off the exterior surface.
• Never use benzol, benzene, or other strong chemical cleaners, as these could damage the

f inish.

OGRAM FUNCTION

The Pro

ram feature can be used to pro

ram up to 20 tracks to pla

y in a selected order

.
1.

While in the stop mode onl

y (CD is not pla

ying), press the CD PR

OGRAM “PR

OG/MEM”
Button, LCD Displa

y will sho

w the w

ording “PR

OG 01” and “PR

OG 01” star

ts to flash.
2.

Press the SKIP+/TUN+ B

UTT

ON or SKIP–/TUN– Button to allocate the desired track.
3.

Press the CD PR

OGRAM B

UTT

ON to select and store the track into memor

.
4.

Repeat step 2 to 3 to select up to 20 tracks.
5.

o pla

y the selected tracks (in the pro

ram mode); press the CD PLA

Y/P

USE B

UTT

.
The track number and the “PR

OG” appear on LCD Displa

.
6.

Press the SKIP-/TUN- Button to hear the pre

vious or press the SKIP+/TUN+ Button
b

uttons to hear ne

xt pro

ram track.
Note:

After all of the pro

rammed tracks ha

e pla

, the CD pla

er will retur

n to the
stop mode.
7.

o clear the pro

rammed tracks from memor

, press ST

OP tw

o times.

SLEEP FUNCT

Press the FUNCTION B

UTT

ON to the desired source.
2.

une in the desired radio station or CD and adjust the v

olume control.
3.

Press the SLEEP B

UTT

The “120” will appear on the clock displa

.
4.

Repeatedl

y press the SLEEP B

UTT

ON for desired sleep time betw

een 10-120 minutes.
5.

The unit will automaticall

y s

witch of

f w

hen the SLEEP time e

xpires.

MUTE FUNCTION

When y

ou press the MUTE B

UTT

, the v

olume will tur

n of

ou will not hear an

y sound.
When y

ou press the MUTE B

UTT

ON ag

ain, v

olume will tur

n on ag

ain.

TIMER FUNCTION

Press the

TIMER B

UTT

ON
2.

Press the SKIP+/TUN+ to set the DESIRED HOUR.
3.

Press the SKIP–/TUN– to set DESIRED MINUTE.
4.

The unit will automaticall

y sound 'b

uzz' w

hen the time e

xpires.

Specif

ications :

er Supplies :

C 120V 60Hz
F

requenc

AM 530 – 1700 KHz
FM 88 – 108 MHz

Unit power supply (mains 120V/60Hz)

Connect the power cable plug to the (120V) wall outlet.

Warning:

• Before using the unit, check that the local mains supply is compatible with 120V (60Hz).
• Do not plug or unplug the power cable when your hands wet.
• When planning not to use this unit for long periods of time (i.e., Vacation etc.)

disconnect the plug from the wall outlet.

• When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the

cord in order to avoid shock risks caused by the damaged cable.

BATTERY SAFETY PRECAUTIONS:

• Keep batteries away from children and pets.
• Insert the battery observing the proper polarity (+/–). Failure to properly align the

battery polarity can cause personal injury and/or property damage.

• Remove spent or discharged batteries from the product. Remove the battery when the

product will not be used for extended periods of time to prevent damage due to rusted
or corroded batteries

• Never throw batteries into a fire, do not expose batteries to f ire or other heat sources
• Battery Disposal: Spent or discharged batteries must be properly disposed of and

recycled in compliance with all applicable laws. For detailed information, contact your
local country solid waste authority.

• Follow the battery manufacturer's safety, usage, and disposal instructions.

ENGLISH