OPERATING INSTRUCTIONS
OI65
Brewing Instructions
The G4 GEMX Intellifresh brewer is factory preset for optimal performance.
((&.9/01&3"5*/(*/4536$5*0/4ø
NC
Place an empty dispenser on
the brew platform. Make sure
that the dispenser is pushed
all the way back against the
front cover and is making
contact with the electrical
socket.
3
*OTFSUBDMFBOQBQFSmMUFS
into the brew basket. Fill with
the proper amount of ground
coffee. Level the coffee in the
mMUFS
4
4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under
the control panel. Slide it all
the way back until it stops.
Rotate the brew basket
UPEJSFDUUIFnPXJOUPUIF
desired dispenser.
)PMEZPVSmOHFSPOUIF
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
mOHFS#SFXJOHXJMMCFHJO
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the
PROGRAMMING GUIDE
section.
The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display.
WARNING
- TO AVOID SCALDING, AVOID SPLASHING.
Keep body parts clear of the brewer during
CSFXJOH%POPUSFNPWFUIFCSFXCBTLFUXIJMFi#SFXJOHwBQQFBSTPOUIFEJTQMBZ
NOTICE
-
Only use GEM3XN IntelliFresh
®
dispensers on GEMXN series IntelliFresh brewers.
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off).
Brewing will start
immediately after you enter
the brew code
. See the
PROGRAMMING GUIDE
to
set up/disable the brew code.
c
d
