Curtis DVBTUK-T3, Руководство пользователя

Страница: 21 / 32

3.4.2) Full Scan Replace Existing Services
When 'Full Scan Replace Existing Services' option is selected, the
same as the 'Full Scan Add New Services' menu is displayed except
that the existing services in the system are deleted before the scan
starts.
Full Scan Replace Existing Services Manual Scan Menu
3.4.3) Manual Scan
This menu allows the user to manually tune in services. Depending on
the transmission this menu will have different parameters.
Editable options are:
Channel Sets the required UHF channel. This will automatically
fill in the frequency entry.
Frequency Overrides and sets the frequency in kHZ.
Tx Mode Selects the required transmission mode. The options are
2K and 8K.
Guard Interval
Selects the required guard interval. The options are 1/4,
1/8, 1/16, and 1/32.
Scan Starts or stops a service scan.
16
3.4.1) Full Scan Add New Services
When the 'Full Scan Add New Services' option is selected, the end of
the service list is displayed. When new services are found , they are
displayed at the end of the existing list in a highlighted yellow colour.
During the scan a progress bar is displayed and a message giving the
estimated time remaining to complete the scan.
When the scan is complete the progress bar will show 100% and a
message stating how many new services have been found is displayed.
Full Scan Add New Services Shows how many services have been added
:90X128mm