Curtis 1KBX70AS, Инструкция по установке и эксплуатации, Страница: 3 / 13

p. 3 of 13
1 . Disconnect the wiring and remove the amber flashers from the
mounts on the tractor. (They will be reinstalled onto the cab in a
later step)
2. Remove and discard the two carriage bolts at the front of the
floorboard on either side of the hood. (Note: Use a socket
extension for easiest access to the nut on the underside)
3. Remove and discard the two outer rear pine tree clips holding the floormat.
4. Remove and discard the two knobs from the ROPS. Replace
with the supplied bolts making sure to properly reinstall the U-
shaped retainer bracket that was removed with the knob.
Ref: Qty: Description:
A 2 Knob
B 2 U-Shaped Retainer Bracket
C 2 M10 x 1.25 x 25mm Hex Bolt
Remove
Flashers
Remove (2)
Carriage
Bolts
Remove (2) Rear
Pine-tree Clips
(1/Side)
A
C
B