Curtis Instruments 1313, Руководство пользователя

Страница: 44 / 46

40 1313 Handheld Programmer Manual
(
18 MARCH 2010
)
1 5 M A R C H 2 0 1 1 D R A F T
Note that you do not need to install each version. For example, if the present
Application software is version 01-
01-03
-00, you can install the newer version
01- 01-09 -00 without installing interim versions such as 01-01-07-00.
When you press the “Yes” softkey, the Firmware Manager appears and a
progress bar shows the application and then the data being installed.
After the update has been completed, you will be asked whether you want
to remove that application file from the SD card. In most cases, you would
select “Yes.” However, if you are planning to make the identical update to a
group of programmers, you could select “No” and then transfer the SD card
from programmer to programmer.
If there is a new Resource file, it will be copied automatically after the
Application upgrade. Do not remove the SD card during the Resource file
transfer.
If the new firmware is in the programmer’s internal memory
Unplug the programmer from the PC and plug it in again to install the
new Application file.
Then unplug it from the PC, remove the USB cable, insert the program-
mer cable, and plug it into the controller.
The Resource file (if there is a new one) will then be installed. Do not
unplug the programmer or turn it off during the Resource file transfer.
16 — UPDATING THE HANDHELD PROGRAMMER SOFTWARE