58967-INS-RB
•
PAGE 3
Step 5
Route the 4-flat harness above the junction
block between the frame and the bed of
the truck. Continue along the driver-side
frame rail to the front of the truck.
Step 8
From the engine compartment ext to the hood
hinge on the driver side, pull back the rubber
filler and run a fish wire down between the
inner fender and the outer fender. Pull the
wheel well panel back and locate the end
of the fish wire. Attach to the 4-flat and
pull to the top of the engine compartment.
Step 6
Route the 4-flat above and along the frame
rail to just behind the driver-side front wheel.
Use the provided cable ties to loosely secure
the wire along the frame rail as needed.
Step 7
Once the harness is just behind the driver-side
front wheel, route the 4-flat harness to
the rear of the driver-side wheel well.
