CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
51180-INS-RE
•
PAGE 2
Search
Select & Connect
Enter 6-Digit Pin#
The vehicle needs to be running or the
ignition in the 'ON' position with the vehicle in park.
At any moment during setup, if the LED on the
Echo
®
is red, stop and refer to the 'Troubleshooting Guide'.
1. Enable Bluetooth in your mobile device settings.
DO NOT
pair the Echo
®
through your phone’s Bluetooth
menu. Bluetooth connection will be done through the app in step 3.
2. Prior to insertion you will need to install the safety strap.
See 'Installing Safety Strap' on adjacent page.
Once the strap and Echo
®
installed and inserted into
the vehicle's 7-way, the LED will flash blue. The Echo
®
is now ready to pair with the mobile application.
3. Launch the app and scan for the Echo
®
. Once the 'Echo
®
Brake Controller' is visible, select it. You will then be prompted
to enter the six-digit PIN, found under the cap of the brake
controller unit or on the provided quick reference card. Once
pairing is complete, the LED light will be solid blue.
4. Plug the trailer's 7-way connector into the Echo
®
brake controller
while parked on a level surface. The LED light on the Echo
®
will
flash yellow for five to eight seconds while calibration occurs.
Once the device is calibrated the LED will turn solid green.
INITIAL SETUP FOR BLUETOOTH CONNECTION
NOTICE
NOTICE
NOTICE
DOWNLOAD THE MOBILE APPLICATION
Mobile applications are available for Apple and Android OS. They can be accessed in the App Store
or Google Play by scanning the respective QR code below or searching for 'Echo
®
Smart Control'.
• Apple OS Requires IOS 5 or higher
• Android OS requires Android 4.3 or higher
• Bluetooth must be enabled on your device for pairing to occur
• After the app is installed, follow the prompts for setup
