HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this
product voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential
loss or damage.
CHEVROLET COLORADO & GMC CANYON
3/1/2017
13203
PAGE 2 of 2
1.) Lower spare tire using the vehicle service tools located in the cab of the truck. Loosen
the spare tire support bracket by removing (2) bolts with a 13mm socket by the spare
winch. Remove the 2 bolts from the factory hitch or cross member and transfer the (2)
clip nuts onto the spare tire support bracket.
2.) Remove (4) bolts securing the factory cross member or hitch to the frame rail with a
21mm socket. Set hardware aside for reuse during CURT hitch installation.
Note: The bumper shares the same mounting points and should be supported from
underneath.
3.) Check to be sure that all wiring clears and slowly pull factory cross member or hitch
downward and remove from vehicle. Clean weldnuts as needed with lubricant and
brush. Replace with CURT hitch, which will mount in the space between the frame and
the bumper mounting plates.
4.) Using the existing mounting hardware, attach the bottom mounting bolts (2 places each
side) and loosely secure so that bumper placement adjustments can be made. Adjust
bumper position to align with side mounting holes and secure remaining (4) bolts with a
21mm socket.
5.) Torque all M14 bolts to 126 ft-lbs.
6.) Reinstall all bolts loosened / removed in step 1. Raise the spare tire back into position.
Содержание 13203
Страница 6: ......
