GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to
repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
6,000
900
8,000
900
CHEVROLET COLORADO & GMC CANYON
3/1/2017
13203
60
38
30
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Scan
for more
information
PAGE 1 of 2
SPARE TIRE
PASSENGER SIDE FRAME RAIL
DRIVER SIDE
FRAME RAIL
FACTORY CROSSMEMBER OR HITCH
REMOVE AND RETURN TO OWNER
VEHICLE BUMPER
TOOLS REQUIRED
RATCHET
13mm SOCKET
21mm SOCKET
9" EXTENSION
JACK STANDS
SPRAY LUBRICANT
WIRE PIPE BRUSH
TORQUE WRENCH
-LOWER SPARE TIRE
-REMOVE FACTORY COMPONENTS
-WELDNUT CLEANING
-NO DRILLING REQUIRED
EXISTING WELDNUTS
IN VEHICLE FRAME
4 PLACES EACH SIDE
REUSE FACTORY
MOUNTING HARDWARE
4 PLACES EACH SIDE
NOTE: REUSE FACTORY MOUNTING HARDWARE AND
MOVE CLIP NUTS TO SPARE TIRE SUPPORT BRACKET
SPARE TIRE
SUPPORT BRACKET
Содержание 13203
Страница 6: ......
