RETRACMIRRORS.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
207700-INS-RA
•
PAGE 4
Step 5 (Optional step for newer VNL trucks)
To apply the cover panel, notches will
need to be made around the mounting
brackets. Hold the cover panel next to
the mounting bracket and mark out
the area that needs to be removed.
To protect the finish, apply masking tape to the
panel and do not remove until the installation is
complete. Make sure the panel is clean before
taping. Using a cutoff wheel or fine-tooth
saw blade, cut out the marked area.
Step 6
Congratulations on the installation
of your new RETRAC bumper guard.
With the bumper guard installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this installation manual.
Representative photo,
actual finish may vary
