Currys C1DVD10, Инструкция по эксплуатации

Страница: 16 / 32

Saf
et
y W
ar
nings
Produc
t O
ver
view
s
Connec
tions
Sy
st
em S
et
-up
Pla
yable Disc / Suppor
tiv
e
For
ma
ts / P
la
yback F
unc
tions
H
in
ts
and T
ips
and Specifica
tion
GB-16
Start Up
Press the STANDBY button to turn on the TV and select the video input connected to the
DVD player.
Switch on the related system power if the DVD player has been connected to another
device e.g. amplifier equipment etc.
Basic Playback
This instruction manual explains the basic instructions for operating this unit. Some DVDs
are produced in a manner that allows for specific or limited operation during playback.
Therefore, this unit may not respond to all operating commands. This is not a defect.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
Unless otherwise stated, all operations described are based on Remote Control use.
Playing a Disc
1. Press the OPEN/CLOSE button to open the disc tray, place a disc into the disc tray
with the label facing up.
• For a double-sided disc, load the side which you want to play facing down.
• There are two different disc sizes. Place the disc in the correct guide on the disc tray.
If the disc is out of the guide, it may damage the disc and cause the DVD player to
malfunction.
• Do not place a disc which is unplayable in this DVD player.
2. Press the OPEN/CLOSE button to close the disc tray, the playback will automatically
start.
• Some discs may not playback automatically, you can press the PLAY button to
start playback.
3. Depending on the disc, a menu may appear on the TV screen by pressing the MENU
button. Press the buttons to select menu options and press the ENTER
button to start, or press digits to select menu options directly.
Stop Playback
1. Press the STOP button to go to pre-stop mode, the TV screen will display “ ”. With
some discs, the DVD player can recall the stopped location, such as on DVDs and on
audio CDs.
2. Press the PLAY button to resume playback from the location where playback was
stopped or from the beginning of the disc.
3. Press the
STOP button twice to stop completely.