Currys Essentials CWC15B14, Инструкция по эксплуатации

Страница: 13 / 20

13
Switching On Your Wine Cooler
1. The internal temperature of the wine cooler is
controlled by a thermostat. There are six settings, of
which position 5 is the coldest and position 0 turns
the unit off.
2. Connect the mains cable to the mains socket.
3. After the wine cooler has been on for 20 minutes
adjust the thermostat control dial to 3. This is the
recommended setting when operating at normal
room temperature (between 16°C and 32°C).
4. The wine cooler may not operate at the correct
temperature if it is in a particularly hot or a
particularly cold room, or if you open the door
often.
5. If you are concerned that the wine cooler is not
being kept cold enough and wish to check the
temperature you will need a special fridge/freezer
thermometer. You may also need a hygrometer to
check the humidity of your wine cooler. These are
available from most supermarkets and hardware
shops.
Place the thermometer and hygrometer on the
shelf of the wine cooler, where it can be read easily.
Leave overnight, the temperature in the wine cooler
should be between 5°C and 20°C and the humidity
in the wine cooler should be between 50%-80%
depending on the type of wine.
Operating Instructions
0
1
2
3
4
5
In the 0 position the wine cooler will not operate,
but the power supply remains connected.
CWC15B14_IB_Final140122.indd 13 22/01/2014 9:19 PM