3. Unscrew the upper pin and screw it into
place on the opposite side. Fit the door
into the upper pin and close it. Screw the
hinge pin bracket securely into place on
the opposite side using the screws.
2. The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires. Tilt the appliance slightly
towards the rear and prop it securely.
Unscrew the door hinge screws and
remove the hinge pin bracket. Open
the door a little way and take it out
downwards.
5. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
4. After placing the freezer door, screw the
middle hinge back onto the opposite
side of the unit.
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the hinge.
INSTALLATION
5
CIFF5012_IB_130114_Edits_Pauline.indd 5
18/01/2013 10:36 PM
