28
Switching Off the Unit
To save energy, remember to switch the dishwasher off using the ON/OFF button. The dishwasher will
continue to use electricity until it is switched off with the ON/OFF button.
If the dishwasher is not going to be used for a long period of time,
e.g. whilst on holiday, disconnect the unit from the mains supply.
Unloading the Dishwasher
Allowing dishes to cool down before unloading is important as dishes tend to break and chip more easily
when they are hot. Therefore, if you open the dishwasher door fully after switching off, it will allow the
dishes to cool down much faster.
• Unload the lower basket first, followed by the cutlery basket and then the upper basket.
• This will help prevent water drops from the upper basket from falling on to the dishes in
the lower basket.
Delay Start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the ON/OFF button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the Delay button.
5. Set the required delay start time using the Delay button.
6. Close the door and the unit will start the programme at the assigned time automatically.
Each press of this button increases the delay start time by 3 hours increments.
