Currys Essentials CDW60B14, Инструкция по эксплуатации

Страница: 11 / 36

INSTALLATION
11
• Do not bend your drain hose.
6. Position the dishwasher next to a water tap and
a drain. Ensure the water inlet and drain hoses
are not kinked or squashed. The unit must not
stand on the mains cable.
You may use a Y-adaptor (not included) for an
additional water feed for another appliance,
for example a washing machine. This is only
applicable for cold water mains. A Y-adaptor
is available from most DIY stores.
7. Make sure your plumbing is suitable for use with
the dishwasher. If in doubt contact a qualified
plumber. This unit MUST BE connected to COLD
WATER MAINS using the new water inlet hose.
OLD HOSE SETS MUST NOT BE RE-USED. The
water pressure from the water mains needs to
be at a minimum of 0.04 MPa and a maximum of
1.00MPa.
• Connect one end of the safety water supply
hose to your dishwasher, and then connect
the other end of the hose to your water
mains. Please ensure the black rubber seal is
in place.
• After connecting the hose, turn on your water
mains and check for leaks.
• Connect the dishwasher to the mains socket.
water mains
Y-Adaptor
(not included)
safety water supply hose
Connect
to another
appliance if
required.