
12
Adjusting Rinse Aid Reservoir
The rinse aid reservoir has six settings. Both the recommended setting and the factory setting is "4". If the
dishes are not drying properly or are spotted, adjust the dial to the next higher number until your dishes
are spot-free.
Adding of Rinse Aid
Rinse aid helps to ensure water does not cling and leave marks on crockery during the drying phase and
helps crockery dry faster after it has been washed. Only pour rinse aid that is for domestic dishwashers into
the reservoir. This model is designed to use liquid rinse aid only.
Please follow the steps below to pour the rinse aid into the storage reservoir, and the amount will dispense
automatically.
1. Turn the cap and open. When the cap open marking is
aligned, you may lift the cap up.
2. Pour the rinse aid until the rinse aid indicator turns
completely black in colour and close the cap.
3. Be careful not to overfill the reservoir. Wipe up any spills.
Rinse aid warning light will illuminate when the
reservoir is running out of rinse aid and requires
refilling.
Alternatively, you can judge the amount of rinse aid
by checking the rinse aid indicator light next to the
reservoirs cap when the indicator is black, it means it
is full. When it is clear, it means it is almost empty.
If the water hardness in your area is soft, you may not need rinse aid as it may
cause white film to develop on your dishes.
If there are some rinse aid residue left in the washing compartment or your
dishes, please turn the rinse aid dispenser dial to 1.
If you select to use detergent tablet, you do not need to add rinse aid into the
rinse aid reservoir.