Currier Tech IZIP VIA URBANO, Инструкция по сборке

Страница: 4 / 16

Handlebar/stem
assembly
Insert
stem into
steering
column
Currie Technologies
Technical and Customer Service
1-800-377-4532
E
5.
Open the quick-release lever on top of the steering column
(photo
D
), then
insert
the handlebar/stem assembly into the column (photo E ). For your safety, be sure
the stem is inserted past the “minimum insertion” line. By sliding the stem up or down,
you can adjust the height of the handlebars to find the most comfortable riding position
once assembly is complete. Close the steering column quick-release lever.
If the quick-release lever does not provide a fair amount of resistance against
being closed, or if the handlebars do not feel securely clamped after closing the
lever completely, you will need to
re-adjust the lever, referring to the appendix
to this guide discussing quick release clamps . You can tell if the handlebars
are properly secure by holding the fork steady and trying to twist the handlebars
out of alignment. If the handlebars are able to turn, you must adjust the quick
release properly or risk having the handlebars turn away from you while riding,
likely causing a fall.
Open QR
D
Handlebars
Seatpost
6.
Unpack the saddle and seatpost. Open the quick-release lever on the bicycle’s
seat tube , then insert the seatpost into the seat tube . To make the next steps of this
assembly easier, the saddle should be set about level with the handlebars . Close
the saddle quick release, referring to the appendix to this guide on quick release
clamps. (Photo
F
).
7.
Flip the bicycle over , balancing it on its handlebars and saddle. Be careful that you
don’t damage the handlebar-mounted controls. (Photo G ).
1. Insert seatpost
into seat tube
2. Close QR lever
F