Currier Tech eZip Skyline Скачать руководство пользователя страница 44

Страница: 44 / 64

Final Check

• After all adjustments have been made, shift through

every gear several times at varying speeds. This will

ensure all your adjustments are correct and will allow

you to pinpoint any trouble areas. If you encounter any

problems, refer to the appropriate section and make any

necessary adjustments.

• Check the tire pressure and inflate each tube to the

recommended psi as stated on the sidewall of the tire.

• Check that the kickstand operates smoothly and the

kickstand bolt is secured tightly.

• Finally, examine the bicycle. Make sure all accessories

are attached and all quick releases, nuts and bolts have

been tightened securely.

• Correct maintenance of your bicycle will ensure many

years of happy riding. Service your bicycle regularly by

referring to the relevant sections of this manual, OR

take it to a professional bicycle shop.

• Remember: Always wear a helmet and obey all traffic

laws.

Never inflate a tire beyond the maximum pres-

sure marked on the tire’s sidewall. Exceeding

the recommended pressure may blow the tire

off the rim, which could cause damage to the

bicycle and injury to the rider and bystanders.

Tighten both rear wheel axle nuts or the quick

release mechanism securely. Failure to do this

may cause the rear wheel to dislodge from the

frame dropouts resulting in serious damage

or injury.

Correct routine maintenance of your new bike will ensure smooth running - Longer

lasting components - Safer riding - Lower running costs

Every time you ride your bicycle, its condition changes. The more you ride, the more frequently maintenance will be required.

We recommend you spend a little time on regular maintenance tasks. The following schedules are a useful guide and by

referring to Part 6 of this manual, you should be able to accomplish most tasks. If you require assistance, we recommend you

see a bicycle specialist.

Schedule 1 - Lubrication

Note:

The frequency of maintenance should increase with use in wet or dusty conditions. Do not over

lubricate - remove excess lubricant to prevent dirt build up. Never use a degreaser to lubricate your chain (WD-40™)

ART 5 - SER

VICIN

Frequency

Component

Lubricant

How to Lubricate

Weekly

Chain

Chain Lube or Light Oil

Brush On or Squirt

Derailleur Pulleys

Chain Lube or Light Oil

Brush On or Squirt

Derailleurs

Oil

Oil Can

Brake Calipers

Oil

3 drops from oil can

Brake Levers

Oil

2 drops from oil can

Monthly

Shift Levers

Lithium Based Grease

Disassemble

Every Six Months

Freewheel

Oil

2 squirts from oil can

Brake Cables

Lithium Based Grease

Disassemble

Yearly

Bottom Bracket

Lithium Based Grease

Disassemble

Pedals

Lithium Based Grease

Disassemble

Derailleur Cables

Lithium Based Grease

Disassemble

Wheel Bearings

Lithium Based Grease

Disassemble

Headset

Lithium Based Grease

Disassemble

Seat Post

Lithium Based Grease

Disassemble

Содержание eZip Skyline

































































Результаты поиска

Содержание eZip Skyline

Отзывы:

Currier Tech eZip Skyline, Руководство пользователя, Страница: 44 / 64

Результаты поиска

Содержание eZip Skyline

Отзывы: