SERENE BACKGROUND LIGHT - QUICK START GUIDE
STEP 1 - Background Film and Background LED Light Installation
Unroll and flatten Background Film. Measure
length (L) and height (H) of glass aquarium panel*
(glass only, don’t include the plastic frame), and
lightly mark cutting lines using a pencil.
*If you have a standard rectangular/cube tank, the front panel is
the same size as the back panel. For bowfront or corner aquariums,
you will need to measure the actual back glass panel.
Using sharp scissors, carefully cut Background
Film to size. You can also use a razor blade and
straight edge for cutting/trimming.
Remove any hang-on filters or other accessories from
back of aquarium. Use a cloth/sponge and freshwater
(NO SOAP or CHEMICALS) and clean back glass panel.
Dry with cloth towel.
(For the best lighting effects, it’s also a great time to clean the inside of your
tank glass and remove any algae!)
STEP 1: MEASURE
STEP 2:
CUT-TO-SIZE
H
L
BEFORE INSTALLATION: The only tools required for basic installation are a pair of scissors and clear tape.
STEP 3:
CLEAN GLASS PANEL
Starting at one side of aquarium, attach Background
Film to back glass panel (textured side facing in, smooth
glossy side facing out) using clear tape. Unroll material,
covering entire back glass panel, tape edge on other side
of aquarium. Ensure material is tight against glass.
STEP 4:
ATTACH WITH TAPE
Moisten suction cups, position Background LED
light in desired location, and press firmly to attach
to aquarium. We recommend mounting it to the
bottom or top of plastic aquarium frame.*
*NOTE: For Rimless Aquarium installations and
using attachment brackets, please visit:
www.current-usa.com/serene-led-guide
STEP 5:
ATTACH BACKGROUND LED LIGHT
