OPERATING INSTRUCTIONS
SHOE ALIGNMENT
The shoes on every Model 754 are set and tested for alignment prior to
shipping. However, if they ever become misaligned, use the following
procedure to realign.
Front Bend — If the front bend has a ”dog,” the elevating shoe
will need to aligned.
Rear Bend — If the rear bend has a ”dog,” the rolling shoe will
need to be aligned.
Loosen the bolts that hold the shoe in question and use a straight piece of
conduit to realign the shoe. Re-tighten the bolts.
8
OPTIONAL SHOE GROUPS
Optional shoe sets to bend mutiple pieces of the same size conduit are
available.
• Part #754-1/2 is the complete set of shoes and accessories to bend 4 pieces
of ½" EMT at the same time.
• Part #754-3/4 is the complete set of shoes and accessories to bend 2 pieces
of 3/4" EMT or 1/2" Rigid at the same time.
MAINTENANCE
To ensure smooth operation, apply a liberal amount of multipurpose grease
to the gear rack monthly.
