SET-UP AND OPERATING INSTRUCTIONS
continued
8
7
6
8
YES
NO
✓
MAIN ROLLER
MAIN ROLLER
6
Turn the adjustable tube in the
direction needed for the type pull
(UP, DOWN, SIDE – See
COMMON
SET-UPS
on page 11.) and slide
back onto the pivot tube to the
desired length and re-pin.
7
Next, to position the extension
arm to the desired angle for the pull,
remove the pin that allows the extension
arm to be adjusted to various positions
and re-pin at desired angle. NOTE: If
needed, the extension arm length may
be adjusted. See close-up photo of side
pull in
COMMON SET-UPS
on page 11.
Set up the cable puller so that pulling rope ALWAYS
contacts both rollers. (See drawing above).
WARNING
DANGER
CAUTION
8
Choose the
conduit coupling
for the size
conduit you will
be connecting
to. Remove the
conduit lock nut
and place the
conduit coupling
over the conduit.
Then, replace
and tighten the
conduit lock nut.
The couplings
are stored on
the mobile cart
on a pivoting
rod. Remove
the lynch pin to
lower the rod.
