Current Solutions LG SMART TENS, Инструкция по эксплуатации

Страница: 18 / 35

4.4.2 Place electrodes on skin
Apply electrodes to the exact site indicated by your physician or
therapist, before applying electrodes, be sure the skin surface over
which electrodes are placed is thoroughly cleaned and dried. Make
sure the electrodes are placed firmly to the skin and make good
contact between the skin and the electrodes. Place the electrodes
over the skin; attach them properly, firmly, and evenly.
CAUTION:
1) Before applying the self-adhesive electrodes, it is
recommended to wash and degrease the skin, and then
dry it.
2) Do not turns on the device when the self-adhesive
electrodes are not positioned on the body.
3) Never remove the self-adhesive electrodes from the skin
while the device is still turns on.
4) It is recommended that, at minimum, 40mm x 40mm
self-adhering based, square electrodes are used at the
treatment area
4.4.3 Electrode placement
The placement of electrodes can be one of the most important
parameters in achieving success with therapy. Of utmost
importance is the willingness of the physician to try the various
styles of electrode placement to find which method best fits the
needs of the individual patient.
Every patient responds to electrical stimulation differently and
their needs may vary from the conventional settings suggested
here. If the initial results are not positive, speak to your physician
about alternative stimulation settings and/or electrode placements.
Once an acceptable placement has been achieved, mark down
the electrodes sites and the settings, so the patient can easily
continue treatment at home.
18