9
advanced features
Additional transmitters
The EnviR can be synced with up to nine additional transmitters. Uses include:
• Monitor individual appliances or components.
• Electrical usage of multiple users in apartment settings.
• Solar or other alternative energy sources monitoring.
• In order to sync an additional transmitter to the device simply press
the UP ( ) or DOWN (V) buttons on the display and you will see
Appliance number in the bottom right corner. When you reach the
desired Appliance #, then pair the transmitter per the instructions
for pairing the display to the transmitter on page 5.
• PowerSave will introduce IAM (Individual Appliance Monitors)
which will allow you to monitor up to nine individual outlets.
Additional transmitters can be ordered from your supplier or
www.currentcost.net
full system Reset
The EnviR can be fully reset to its factory condition. Resetting the EnviR will wipe out ALL historical
data and pairing information. To fully reset the EnviR:
• Remove the display power lead from the display.
• Press and hold the UP ( ) and DOWN (V) buttons as you push the display power lead into the back
of the display. When RED LED light flashes release the buttons.
• The display will show software version number.
• Remove and reconnect the power lead on the display. This switch-on wipes all history and
pairing ID’s and burn in fresh defaults.
• Display unit will need to be paired again and rates need to be reprogrammed see page 5.
daTa output
• The EnviR will store up to 7 years of historical data. On the back of the display a USB cable can be
connected to facilitate both historical and real time data transfer to a MAC or PC.
• When installing the USB cable to the computer make sure you download the appropriate USB driver.
Please visit
www.currentcost.net
for more information on available software downloads.
• Once the EnviR is connected to a computer the historical data will transfer automatically at 1 minute
past every odd hour, ie 17:01, 19:01 etc. A burst of data is sent once every 10 seconds. History Data
is sent for all 10 sensors regardless if they are now present or not.
Time
Last Days
Yesterday
kWh
Night
Per
Day
Day Eve
Appliance
Time
30
kW
Energy Now
Cost
$
PowerSave Envi R Man.indd 9
04/08/2011 10:27