4
Go green with ENVI – ENVI User Manual
5
How it works
The ENVI monitor shows real time information; a wireless signal is sent every six
seconds from a transmitter attached via a CT Jaw to your meter, to the display. This
enables you to view your energy consumption, reading changes as and when you’re
usage changes.
Have you got everything?
In the Box
Contents of your box
• ENVI Display
• C² Transmitter with CT Jaw
• Power adapter for display
• Instructions manual
• 1 year Warranty
Before you get started – Safety and care of your monitor
It’s important you observe some simple precautions before using the product:
The ENVI display does not require you to carry out any electrical wiring. However, the
transmitter is to be installed at the meter near the electrical supply to your property.
If you have any doubt about how to install it safely do not attempt to install it
yourself, but consult a qualified electrician.
Similarly, if you notice anything unusual about your electricity supply, such as loose
wires, exposed cabling, burn marks or holes in the insulating materials or damage to
your meter then
STOP
immediately and consult an electrician.
X
Do not attempt to repair or service any part of the ENVI equipment. Contact
our customer service department for assistance
X
Do not immerse the product in water, or any other liquids
X
Do not expose the product to heat, flame, steamy conditions or extreme cold
X
Do not open the equipment or touch any of its electronic circuitry
X
Do not hit, strike or drop the equipment – if the display gets broken, take
special care not to touch the liquid crystals
X
Do not use this product for any purpose other than for which it was intended
