Dipole/Bipole Series Ceiling Speaker
User’s Installation Guide
CS DB Series 01010 RPA
Limited Lifetime Warranty
Current Audio speakers are warranted to be free from defects in materials and or workmanship to the original retail purchaser provided the
speaker was purchased and installed from a Current Audio Authorized Dealer.
In the event of defective materials and or workmanship, Current Audio ,LLC will, without charge, repair or replace, at its option, the defective
product. In order to make claim under this Warranty and to obtain performance of any obligation under warranty, please contact Current Audio
LLC. Instructions will be given on how to return the defective product to Current Audio. Returned products must be shipped prepaid. Proof of
purchase must be provided with the product.
The Warranty does not apply to damage not resulting from defective materials and or workmanship while in the possession of the original
consumer or due to unreasonable use by the original consumer, which includes but not limited to improper installation, negligence,
unauthorized repair or modification, aesthetic deterioration from the environment. Products purchased by unauthorized sources will void the
warranty and not be honored.
Current Audio ,LLC is not liable for any incidental or consequential damages, so the above limitations or inclusion may not apply to you. This
warranty gives you specific legal rights, and you may have other rights, which vary from state to state within the United States.
Step 1, Align the Grille
Step 2, Grille Aligned
Step 3, Push Grille Flush to Bezel
Specifications subject to change without notice.
SpeKap
Breathable Membrane- Keeps Debris, Rodent Droppings and Insulation out of the Speaker
After Connecting Wires, Inserting Speaker, Cinching Down the Dog Legs and Aiming the Tweeter to the
Sweet Spot; Insert the Grille into the Keeper System and Push it Flush to the Bezel. Do not push directly in
the center Oil canning will occur. Push the grille down on the sides flush to the bezel.
6.5” In-Ceiling
8” In-Wall
8” In-Ceiling
Push
Here
NOTE:
If you have blown-in insulation and/or a potential rodent problem I suggest you install the SpeKap.
It is a breathable membrane that will keep
rodent
droppings, debris, and insulation from entering the back of the speaker that
could change the performance of the speaker. See figures
Painting the Speaker Grille
If grille requires painting , carefully remove the white scrim cloth on the inside of the Grille and save for reinstallation. This cloth is provided for aesthetic
purpose only. Either spray paint the grille or use a stiff stipple paint brush. Do Not clog the perforated holes as this will impede the acoustics of the
speaker.
