Cupra BORN, Руководство пользователя

Страница: 91 / 343

Opening and closing
90
Note
• Only use the key button when you re-
quire the corresponding function. Pushing
the button unnecessarily could accidentally
unlock the vehicle or trigger the alarm. It is
also possible even when you are outside the
radius of action.
•
Key operation can be greatly influenced by
overlapping radio signals close to the vehicle
working in the same range of frequencies,
for example, radio transmitters or mobile tel-
ephones.
• Obstacles between the remote control and
the vehicle, bad weather conditions and dis-
charged batteries can considerably reduce
the range of the remote control.
• If the buttons of the vehicle key are
pressed or one of the central locking but-
tons
›››
page 95
is pressed repeatedly in
short succession, the central locking briefly
disconnects as protection against overload-
ing. The vehicle is then unlocked. Lock it if
necessary.
•
Spare remote control keys are available at
your Technical Service, where they must be
matched to the locking system.
Pull out the key blade
Fig. 82 Vehicle key: remove the key shaft.
The central locking remote control has the
key blade inside it for use in case of emer-
gency locking/unlocking of the driver's door
›››
page 98 .
• Press the
›››
Fig. 82
1
button to release the
ring from the key fob and remove the key blade
2
. Pressing lightly on the ring leaves it fixed as
a key fob.
•
Press the
›››
Fig. 82
1
button to unlock.
Press and hold button
1
and at the same
time pull on the ring in the direction of arrow
›››
Fig. 82
2
to completely remove the key
shaft.
Changing the battery
Fig. 83 Vehicle key: open the battery
compartment cover.
Fig. 84 Vehicle key: removing the battery.
CUPRA recommends you ask a specialised
workshop to replace the battery.
The battery is located to the rear of the vehicle
key, under a cover.