Cupra BORN, Руководство пользователя

Страница: 84 / 343

High-voltage battery Charging the high-voltage battery
83
Troubleshooting
Fault in the high-voltage system
The warning lamp lights up red. A message is
displayed in this regard.
There is a fault in the high voltage system. The
high voltage components may be damaged
›››
.
It is not possible to charge the high-voltage
battery.
• The vehicle must be parked in a safe
place . Park the vehicle outdoors as soon as it is
possible and safe to do so.
• Switch off the drive system.
•
Seek professional assistance.
Deep discharge of the high-voltage bat-
tery due to prolonged parking time
The control lamp lights up red. A message is
displayed.
The high-voltage battery can be damaged if,
for example, the vehicle is not used for a long
time.
• Charge the high-voltage battery immedi-
ately.
High voltage battery discharged
The control lamp switches on yellow. A mes-
sage is displayed.
• Charge the high-voltage battery immedi-
ately.
Low state of charge in the high-voltage
battery
The control lamp switches on yellow. A mes-
sage is displayed showing the remaining range.
The high-voltage battery charge has reached
the reserve level.
• Charge the high-voltage battery.
Range calculation fault
The control lamp switches on yellow. A mes-
sage is displayed.
There is a fault in the range calculation. Con-
tact a specialised workshop.
The charging process is not possible or has
been paused
The charging process indicator located next to
the charging socket lights up red.
Before visiting a specialist workshop, you can
try the following solutions:
•
Plug the charging cable back in.
• Check that the charging connector is plug-
ged in correctly.
•
Check if a fault is displayed on the charging
station or, depending on the equipment, on
the charging cable protection device.
If the fault cannot be rectified, contact a spe-
cialist workshop immediately.
The charging cable protection device dis-
connects
If electrical devices with a separate electrical
connection, e.g. a cool box, are used in the
vehicle at the same time, the self-test of the
protective device may detect a fault.
• Please note the order! First connect the
charging cable to the external power supply
and then to the charging socket.
The charging time varies
During the direct current (DC) charging proc-
ess, the charging current is reduced automat-
ically to preventing the high-voltage battery
from overheating.
After several fast charging processes in a row,
the charging time is temporarily extended.
WARNING
High-voltage components, including the bat-
tery and high-voltage cables, may be live and
damaged. The high voltage system voltage is
dangerous and can cause burns, other inju-
ries and fatal electric shocks.
•
Do not touch the high voltage compo-
nents!