Cupra BORN, Руководство пользователя

Страница: 132 / 343

Air conditioning Heating, ventilation and cooling
131
ted. The mode will deactivate as soon
as manual changes are made to the fan
speed, air distribution, windscreen demist-
ing or air recirculation.
Fan speed in
mode can be set in the
Climaprofile (low, medium or high) by suc-
cessively pressing the function button .
Climaprofile adjustment is also possible in
the Settings submenu.
iClimate submenu
Submenu where different smart and/or auto-
matic functionalities are located, depending
on the version.
Warm hands: automatically adjusts for a
certain time the air conditioning to heat
the steering wheel area.
Cool feet: automatically adjusts for a cer-
tain time the air conditioning to cool the
footwell area.
Defog the windows: automatically ad-
justs for a certain time the air condition-
ing to defog the windscreen.
Warm feet: automatically adjusts for a
certain time the air conditioning to heat
the footwell area.
Fresh Air: automatically adjusts for a cer-
tain time the air conditioning to ventilate
the passenger compartment.
Fast cooling: automatically adjusts the air
conditioning to ventilate the vehicle in-
terior for a certain amount of time.
Fast heating: automatically adjusts the
air conditioning to heat the vehicle inte-
rior for a certain amount of time.
AirCare Climate submenu
The air conditioning system contains a filter
that can reduce the penetration of allergenic
contaminants.
When the Air Care function is activated, the
recirculation mode is on and the air is regula-
ted automatically and continuously, as long as
there is no detection of fogging hazard.
• Press to switch the AirCare function on/
off.
• Press to access information about the Air-
Care system function.
Settings submenu
Submenu where the following settings are lo-
cated:
•
Automatic recirculation: to switch automatic
air recirculation on and off
›››
page 131 .
• Climaprofile: To adjust the fan speed ( low,
medium or high ) during operation in mode.
•
Smart Heated Seats: Pressing turns the
smart heated seats function on/off for the
driver and front passenger
›››
page 132 .
Air recirculation
Air recirculation mode prevents the ambient
air from entering the interior.
When the outside temperature is very high,
selecting manual air recirculation mode for
a short period refreshes the vehicle interior
more quickly.
For safety reasons, air recirculation is discon-
nected when
is pressed or when a sensor
detects that the vehicle's windows may mist
up.
Switching the manual air recirculation mode
on and off
•
Press the button to switch manual air re-
circulation on or off.
Climatronic automatic air recirculation
mode
With the automatic air recirculation mode ac-
tivated, the entry of fresh air into the cabin
interior is enabled. If the system detects a high
concentration of hazardous substances in the
ambient air, air recirculation mode is switched
on automatically. When the level of impurities
drops to within a normal range, recirculation
mode is switched off.
The system is unable to detect unpleasant
smells.