Cuppone Michelangelo ML 635, Руководство по предварительной установке и установке

Страница: 25 / 44

25
Ed. 0121 - 70702520 REV06 Michelangelo - Pre-installation
Kg
lb
EC O
EC O
EC O
EC O
min.
min.
500 mm
[ 19,7 in. ]
250 mm *
[9.84 in.]
*
1000 mm.
[40 in.]
250 mm *
[9.84 in.]
*
min.
50 mm
[ 1.97 in. ]
min.
50 mm
[ 1.97 in. ]
Fig. 8
Fig. 9
Positioning
Fig. 8
The positioning room must comply with the instructions pro-
vided on page
4
and
5
. Comply with the measure-
ments shown in the figure.
Fig. 9
The oven must be placed on a base, built by the Manufacturer
or by yourself that:
•
is flame and heat resistant;
•
is perfectly stable and level;
•
withstands the weight of the appliance.
Model single double
ML 435 169 kg - 372,5 lb 302 kg - 665,7 lb
ML 635 218 kg - 480,6 lb 380 kg - 837,7 lb
ML 635 L 212 kg - 467,3 lb 378 kg - 833,3 lb
ML 935 283 kg - 623,9 lb 473 kg - 1042,7 lb
In both cases, silicone the gap between the oven and the sup-
port or the bearing surface, using high temperature resistant
silicone.
The minimum side distance is 50 mm
[1.97 in.], However we recommend you
leave a gap of 500 mm [19.7 in.] on the
right side* to make access to the electrical
system easier. If this is not possible, in
case of intervention, it will be necessary
to move the oven from its housing with
suitable systems
FOR USA VERSIONS
ONLY
FOR USA VERSIONS
ONLY