Cuppone Leonardo LN2T, Руководство по предварительной установке и установке

Страница: 18 / 28

18
Safety instructions
• Read this guide carefully before installing the
appliance, and keep it with care in an accessible
place for any future consultation by the various
operators.
• Moreover, the manual must always accompany
the product through its life, even in case of
transfer.
• Before any movement or installation, check
that the room is suitable and systems comply
with the installation country standards and the
specifications indicated on the appliance rating
plate.
• All installation, assembly and non-routine
maintenance operations must be performed
exclusively by qualified technicians that are
authorised by the Manufacturer, in compliance
with the regulations in force in the user country,
and with the regulations on systems and work
safety.
• Before performing any installation or
maintenance, disconnect the electricity supply.
• Unauthorised actions, tampering or
modifications that do not follow the information
provided in this manual can cause damages,
injuries or fatal accidents and null and void the
warranty.
• It is forbidden to install the hood in environments
at risk of explosion.
• Installation or maintenance that fails to comply
with the instructions in this manual may cause
damage, injury or fatal accidents.
• Persons not involved with the appliance
installation may not pass through or stand in the
work area during appliance assembly.
• The rating plate provides important technical
information that is vital in case of a request for
maintenance or repair of the appliance: please
do not remove, damage or modify it.
• Failure to follow these regulations may cause
damage or even fatal injury, subsequently
invalidating the guarantee and relieving the
Manufacturer of all liability.
The company cannot be held liable for any print or transcription errors,
reserving the right to make changes where deemed suitable without
prior notice.
Partial reproduction prohibited without the consent of the Manufacturer.
The measurements provided are indicative and not binding.
The original language used to prepare this manual is English: the
Manufacturer is not responsible for any translation/interpretation or
print errors.
Symbols used in the manual and on
the labels applied to the machine
Indicates that caution is required when performing
an operation described by a paragraph that con-
tains this symbol. The symbol also indicates that
maximum operator awareness is required in order to
avoid unwanted or dangerous consequences
Reference to another chapter where the subject is
dealt with in more detail.
Manufacturer’s advice
Indicates that the surfaces marked with this symbol
may be hot and must therefore be touched carefully
Dangerous voltage
The symbol identifies the terminals which, connect-
ed to each other, carry the various parts of a device
or system to the same potential (not necessarily the
earth potential)
Indicates that it is necessary to read carefully the
paragraph marked with this symbol before installing,
using and maintaining the equipment
3
INSTALLATION