CUMMINS ALLISON Universal JetScan 4161, Руководство пользователя

Страница: 7 / 22

6
Key Description
All Batch
(Key 5)
This key is used in conjunction with Clear to simultaneously clear batch
(strap) counts for all denominations.
End Sub
(Key 6)
This key is used to clear sub-batches. It also can be pressed after Clear to
reconcile a sub-batch.
Mode
(Key 7)
This key is used for setting an operating mode. Holding down the key for
2 - 3 seconds allows the user to select the country’s currency that will be
processed.
Add
(Key 8)
This key is used for accumulating a batch total even after notes have been
removed from the stacker. It also is used to enable the sub-batch
function.
Verify
(Key 9) This key is used to review a count suspected of being erroneous.
Unit
(Key 10)
This key is used to toggle between value and piece count.
In count mode, the Unit key is locked ON for piece
counting only.
CF
(Key 11)
This key is used to activate counterfeit detection and set sensitivity by
denomination.
Density
(Key 12)
This key is used for setting doubles-detection sensitivity by denomination.
Denom
(Key 13)
This key is used to select the denomination appearing on the display
screen.
Set Batch
(Key 14)
This key is used for setting a batch (strap) limit at any preset value (5, 10,
20, 25, 50, 75, 100 or infinity). This key also is used to set custom values,
such as 53 or 79. Holding down the key 2 - 3 seconds increases the value
by one.
End Tot
(Key 15)
This key clears all batch and sub-batch totals. It also will clear all batch
(strap) counts and generate a print report, if these features have been
enabled. Holding down this key for 3 seconds allows access to USER
SETUP and DIAGNOSTICS without powering down the machine.
Denomination
Value Keys
Single-pocket Universal JetScan value keys (VAL keys) represent note
denominations that have been pre-programmed for specific countries. The
VAL 1 through VAL 9 keys are each assigned to one denomination, from
lowest to highest, by country.
If these keys have been activated in USER SETUP, recovering from certain
stopping conditions is accomplished by simply pressing the key that
corresponds to the top note in the stacker. It will add that note amount to
the machine’s totals and restart the machine.
Please contact a Cummins Allison representative
to obtain the value key (VAL key) layout for a
particular country.
Single-Pocket Universal JetScan ® Note Scanner
All Models