Sort Disk Partial Removal
The sort disk can be partially removed to clean and service the sort disk and to remove coins and debris
from the coin pad.
Figure 2 Sort Disk (Top View)
Sort disk partial removal– Figure 2
1.
Remove lift tray assembly
.
2. Turn the three toggle catches parallel to the arms of the hold-down forks -- see Figure 2.
3. Lift the sort disk up and turn vertically, without pulling the connecting wires from their harness.
4. Place the anchor pin in the mounting hole near the rear of the cabinet -- see Figure 3 on the next page.
800 786 5528
Page 4 of 5
cumminsallison.com