cumi CTK 035, Руководство пользователя, Страница: 7 / 12

-7-
Usage Instructions
The machine is intended for impact drilling in brick, concrete and
as well as for drilling in wood, metal and plastic.
Auxilary Handle
Slide the handle onto the drill and rotate to the desired working
position. To clamp the auxiliary handle rotates the handgrip
clockwise. To loosen the auxiliary handle rotate the hand grip
anti-clockwise. Always use the auxiliary handle.
WARNING! Always check and rotate the handle tightly before
using to avoid any accident.
Installing the depth gauge
(See Fig. B)
The depth gauge can be used to set a constant depth
to drill. To use the depth gauge, loosen the handle by
rotating the bottom section of handle anti-clockwise.
Insert the depth gauge through hole in handle. Slide
the depth gauge to required depth and tighten fully.
Inserting a Tool into Chuck
(See Fig. C)
Remove chuck key from key storage tab at base of drill
handle, place key into chuck, turn key anti-clockwise to
undo/loosen chuck, inset drill/tool and rmly tighten
chuck by turning key clockwise. Remove key and
replace in storage tab at base of drill handle.
ON/OFF Switch
Depress the switch to start the tool and release it to
stop your tool.
Switch Lock-ON Button (See Fig. D)
Depress on/off switch then lock-on button, release on/
off switch rst and lock-on button second. Your switch
is now locked on for continuous use. To switch off
your tool just depress and release the on/off switch.
1
2
1
2
a
1
2
D
C
B