background image

1. Safety

6

PNEG-881

 Curtain Controller

Safety in Handling the Curtain Controller System

The Curtain Controller weights:

All precautions should be taken when lifting and/or moving the unit, to prevent the risk of physical injury.

Maximum Load

The Curtain Controllers with 15 RPM and 30 RPM gear motors can lift a maximum of 4000 lbs/1814 kg 
at a 1:2 pulley ratio. 60 RPM Gear motors can lift a maximum of 1000 lbs/453 kg at a 1:2 pulley ratio.

Safety in Maintenance

While the Curtain Controller is designed to keep maintenance to a minimum, some maintenance will be 
necessary in the course of the life of the machine. Do not attempt any repairs on the machine unless you 
are competent to do so. Remember that the Curtain Controller may operate under automatic control and 
start without warning. Never attempt any work on the Curtain Controller without first isolating the 
machine from the main power and locking the isolator so that only you can turn the power back ON.

Follow all guidelines given in the maintenance section of this manual.

Before restarting the Curtain Controller, ensure that all electrical enclosures are locked closed and all 
guards and other safety measures are correctly fitted.

If in any doubt, contact your dealer or GSI for assistance.

Noise

Tests on this machine indicate noise levels at a position one (1) meter from the drive unit, and 1.6 meters 
above the ground do not exceed 70 dBa, continuous “A” weighted sound pressure or 63 Pa, 
instantaneous “C” weighted sound pressure.

Model #

Weight

SPRKT2415

104 lbs/47 kg

SPRKT2430

SPRKT2460

SPRKT3615

119 lbs/54 kg

SPRKT3630

SPRKT3660

SPRKT4815

135 lbs/61 kg

SPRKT4830

SPRKT4860

SPRKT6015

151 lbs/69 kg

SPRKT6030

SPRKT6060

Содержание SPRKT2415



































Отзывы: