PNEG-1756
18" and 24" Panel Pit Fan (78° and 90°)
15
5. Electrical Wiring
All wiring should be installed in accordance with National, State and Local Electrical Codes. A certified
electrician should complete this portion of the installation to ensure safety and that the wiring is correct for
the application.
Fans for use as livestock facility ventilation should be connected to individual electrical circuits, with a
minimum of two (2) circuits per room.
For single phase fans: The motor overload protection should be provided for each fan. A circuit breaker
switch or slow blow motor type fuse must be used.
Figure 5A
