8. Secure the cone assembly (L) to the cone hanger bracket (K).
NOTE:
• Three people should lift the cone assembly (L) to the fan top panel. Typically one
person on either side of the cone lifting, with one person in the middle helping assist
the cone to slip over the venturi throat.
CAUTION
Three people are required to safely hang the cone assembly due to
its weight. Using fewer than three people to hang the assembly can
result in injury.
• Rotate the smaller end of the cone assembly (L) to align with the cone hanger brackets
(K).
• Tighten the screws of cone hanger bracket (K) after the cone assembly (L) is secured
in place.
CAUTION
It is very important that the cone assembly (L) is properly inserted
into the cone hanger bracket (K). Failure to do so will result in
personal injury or equipment damage.
Figure 3-14
Install Cone assembly on Cone hanger bracket
K
Cone hanger bracket (12-0651)
L
Cone assembly
PNEG-1502
54" Galvanized Mega Flow Butterfly Fan
27
