STEP 1:
.
Assembly Step
Page 3
B
A
Note:Self adhesive Buffer provided if required.
STEP 2:
Careful: Extremely Heavy Product.
Place Top (A) upside down on a non-damaging padded surface. Position first Leg (B) to the under- side
of the Top ensuring Leg holes are aligned with holes at the underside of the Top. Secure the connection
using 4 Bolts (H1) and Flat Washers (H2) and tighten using Spanner. Repeat the same step to assemble
other Leg (B).
Turn the Dining Table in upright position. Assembly is complete and the Product is ready to use.
Note:
x6 Self adhesive buffers have been provide inside the hardware kit. Peel of the backing and
stick to the leg base if required.
A
