CULLMANN CUlight FR 60F, Руководство пользователя

Страница: 15 / 27

42
Maximum Stroboscopic Flashes:
• Even with multiple slave units, the master unit can
control all of them via wireless.
• In this user manual, “master unit” refers to the camera
fl ash on a camera and “slave unit” will be controlled by
the master unit.
29 99
&9;
&9/
&9&.
&9'8
&9.;
&9&8/
:
K
&;
'+
.+
O+
&++
.
&;
'+
.+
O+
&++
4
*
&8
'+
.+
O+
&++
;
&+
8+
*+
/+
&++
1
;
/
8+
*+
/+
&++
2 5
'
.
8+
;+
K+
O+
6 3
'
*
&+
'+
.+
/+
:9
8
;
/
8+
*+
K+
::
8
;
/
8+
;+
K+
8
;
/
8+
;+
.+
8
;
/
&/
'*
*+
: :
8
;
/
&8
8+
;+
8
;
/
&.
'+
;+
9 19 :1 :3
)ODVK
RXWSXW
Wireless Flash Shooting:
Radio (2.4G) Transmission
• You can set up three slave groups for TTL autofl ash shooting.
With TTL autofl ash, you can easily create various lighting
effects.
• Any fl ash settings for the slave units on the master fl ash in
TTL/Manual/Multi
mode will be automatically sent to the
slave units. So the only thing you need to do is to set the
master unit for each slave group without any operation for the
slave units at all during the shooting.
• This fl ash can work in TTL/M/Multi/OFF fl ash modes when
set as a master unit.
As a slave unit, CUlight FR 60F is compatible with the
Culight FR 36F fl ash unit or with CUlight RT 500F transmitter.
1. Wireless Settings
You can switch between normal fl ash and wireless fl ash. For
normal fl ash shooting, be sure to set the wireless setting to OFF.
Master Unit Setting
1
Press <
R
> button so that
< > is displayed on the
LCD panel. If < MULTI >
is displayed, it means Multi
mode is ON.
2
The backlight turns green
now.
43
Slave Unit Setting
1
Press < R > button so that
< > and < > are
displayed on the LCD panel.
2
The backlight turns orange
now.
2. Setting Master Unit’s Flash Mode
1
Press Function Button 4
< Gr > to choose the group
from M/A/B/C. Then, press
Function Button 3 <
MODE
>
so that the master unit can
work in OFF/TTL/M fl ash
mode. Choose one of them
as the fl ash mode of master
unit.
2
Press < MODE > button to
switch to Multi mode.
3. Setting the Communication Channel
If there are other wireless fl ash systems nearby, you can change
the channel IDs to prevent signal interference. The channel IDs
of the master unit and the slave unit(s) must be set to the same.
1
Press Function Button 3
< CH > and turn the Select
Dial to choose a channel ID
from 1 to 32.
2
Press the <
SET
> button to
confi rm.
4. TTL: Fully Automatic Wireless Flash
Shooting
Autofl ash Shooting with One Slave Unit
1
Master Unit Setting
• Attach a CUlight FR 60F
camera fl ash on the camera
and set it as the master
unit. (Page 42)
• M/A/B/C can be set as TTL
mode independently.
R
CUlight_FR60F_BDA_Fuji 171010.indd 43 10.10.2017 16:21:14