First Time
Set-up
Process
7
First Set-up Procedure
After completing the plumbing connections to the water softener, follow
these steps to turn on and program the softener controller.
STEP 1: Plug in the wall transformer
STEP 2: Perform the on-display “First Time Setup” process
„
Moves up the menu
‰
Moves down the menu
P
Changes the display, accept desired change
X
Cancel or exit
When a new controller is first turned on, the display will show the
messages shown. The controller is designed to simplify the setup and
installation process by making some default recommendations during the
Initial Setup. The default settings are designed to be appropriate for most
common installations.
Default Settings
1
= these items are changed on the Main Menu / Advanced / System Setup Menu
= these items are changed on the Main Menu / Advanced / Regen Setup Menu
3
= these items are changed on the Main Menu / Advanced / Regen Trigger Menu
1. Electronic Serial Number, FIrmware version and release date.
S/N: 00000123
FWV 119LT 01
Jan 26 2009
The second screen which shows is very important as it shows the electronic ID number of
the controller.
Controller
Remote
First Time Setup
Press Down
Time of Regen = :00 AM
Regen Time = Delayed
Time Clock Backup = OFF
3
Day-of-week Regen = OFF
3
Pre-Rinse Mode = OFF
1
•
•
•
•
•
